46
12.3.3 Reaction at Call (INCALL)
Any call with a phone number matching the one from the phone book may trigger this INCALL
function. This specifically refers to the number ranges that are introduced for this purpose.
This function can only work with active caller ID transmission.
If there are any problems with recognition of a phone number, use another mobile
phone to check which phone number is transmitted. In some countries, the country
code is not transmitted. In this exception, the function should be tested using the
number displayed on the test phone.
A frequent mistake is programming the car alarm system’s own phone number into
the phone book instead of the phone number of the mobile phone to be permitted.
The INCALL event can trigger the following actions:
Switch relay:
Use this parameter if calling in is to switch a specific relay:
SET INCALL <OUT1/OUT2> <time> [ALL] #1513
The parameter „time“ represents the function or activation duration:
Value 0:
switch 1x
Value 1.....253:
Time in seconds (1.....253 seconds)
Value 254:
1/4 second
Value 255:
1/2 second
After a call, the corresponding relay is switched for the set period (parameter „Time“). Use the
optional parameter „ALL“ to instruct switching accordingly at every call.
Return GPS/ GPSMAP position:
To save costs, use the INCALL function to return the current GPS position to the calling
number.
SET INCALL <GPS/GPSMAP> [ALL] #1513
Here, either the GPS coordinates or a link are returned to the caller by text message after a
call, if the phone number is in the phone book. For the optional parameter „ALL“, the phone
number is returned to all callers.
