![background image](http://html1.mh-extra.com/html/conrad/64-64-24/64-64-24_operating-instructions-manual_2654370036.webp)
36
9. Operation
Please note:
Upon delivery, the components of the FS20 system do not react to
remote control commands. These have to be addressed first in line
with the instructions for the respective switching device. Then you can
access the basic functions immediately.
For programming, plug the jumper "J1" in the position "Prog"; for normal
operation in position "Betr.)
a) Basic functions
Either press the buttons briefly (switching) or longer than 0.6 seconds (e.g.
dimming).
The
right
key of a channel has the function "
ON
" (dimming up), the
left
key the
function "
OFF
" (dimming down).
The sending of a command is signalled by the brief flash of the control LED.
You can program and operate the FS20 components in their basic functions.
If you intend a system expansion with several components or want to use the
additional functions, please also read the following chapters.
Summary of Contents for 64 64 24
Page 102: ...102 ...
Page 103: ...103 ...