35
10.6 Grinding coffee beans
WARNING: Risk of injury by moving parts. Sharp blades.
Always disconnect the appliance from the
mains socket before installing or removing the cutter head and bean box assembly. The blades of the cut
-
ter head are sharp. Handle and clean the cutter head with care. Before plugging the machine, make sure
that all parts are properly installed. Never reach into the cutter head or bean box after installing them on
the appliance.
This product has a coffee bean grinding function.
1. Disconnect the appliance from the mains socket.
2. Carefully insert the cutter head
(2)
into the machine and tighten it clockwise by holding the wire handle.
1
2
3.
Then install the bean box
(1)
into the machine as shown below. Align the bean box with the machine, press down
and turn it clockwise to lock it into place.