![background image](http://html1.mh-extra.com/html/conrad/12-48-00/12-48-00_operating-instructions-manual_2654224007.webp)
9
19. REL = Relative = Reference Value
20. MEM = Memory = to memorize the value
21. RCL = Recall = to get back the memorized reading on the display.
22. CMP = Comparison = Compare a Reading
23. Reference No. (0 to 9)
24.
/
= Diode Test and acoustic continuity check
25. AC = Symbol for AC current or voltage
26. "
−
" = Minus Sign or Symbol for Negative Polarity
27. FREQ = Frequency
this symbol is displayed in the frequency count mode
28. CAP = Capacitance
CAP is for Capacitance => Measurement of capacitors
29. hFE This symbol indicates the transistor test.
30.1., 2. and 3. Sub-Display
These three small sub-displays with 4
1
/
2
digits are activated during
the different function modes.
31.
= Low Battery
When this symbol is displayed, it is time to change the battery
32. Different Units of the Display Values
33.
= Inductance measurement (coils)
34.
= cos phi sign (for power factor)
+
-
8
8. Rotary function switch (=measurement function switch) for setting
the various modes of operation (voltage measurement, current mea-
surement, etc.) and measurement ranges.
9. 20-A Input Socket
This input socket is fused with 20 A and is designed for measuring DC
and AC current to max. 20 A (max. 30 s with 15 min. interruption bet-
ween the measurements).
10. mA-input
This socket is for measuring DC and AC current to 200 mA max. (fused
with 800 mA quick blow)
11. COM (
−
) -Input Socket (COM or Minus Terminal)
12. V/
Ω
-(
+
)-Input Socket (Plus Terminal)
13. Multifunction Liquid Crystal Display
(LCD) (4
1
/
2
digit, max. display value 19999) with three 4
1
/
2
subdis-
plays.
14. Analogous Bargraph
15. Bargraph-Segments
16. Overload "OL"-Indication
"OL" is displayed and an acoustic signal is emitted when the range is
exceeded = overflow (no acoustic signal during resistance measure-
ment, or diode test).
Attention!
Observe the max. input limits.
17. Data Hold D-H
Data Hold means the meter will "freeze" a display reading.
18. A-H "Auto-Hold" = Min, Max and AVG holding with simultaneous
display
Summary of Contents for 12 48 00
Page 3: ......