www.conquerordoors.com
2
Features
Manual locking of the door when a power failure occurs: If power failure occurs while
the door is opening, the door can be released by pulling the clutch down, then manually
moving the door to the closed position, then the door can be locked. The system can be
automatically re-engaged again once the power is back on again simply by pressing the
open/close button on the remote. The chain will travel until the spool on the chain
engages. After this, normal operation is resumed.
Rolling code: integrated circuit with specialized rolling code with over a billion random
codes. Up to 20 transmitters can be coded to the auto opener.
Travel and limits memory: the limit and travel settings are stored on a microprocessor
chipset, even after the power is removed, the information will be retained on the chipset.
Soft start & soft stop which lessens the impact on the door during operation, and prolongs
the life of both the door and opener. This also provides extremely quiet operation as there
is no sudden stopping or starting of the door.
Resistance/sensitivity protection: the opener will check and set the force protection which
ensures the opener has optimum operational sensitivity. The circuitry automatically
adjusts the sensitivity control of the door during standard operation allowing manual
adjustment to be unnecessary.
Photo cell beam sensors can be connected to the opener to ensure further protection.
Auto closing: A function that allows the opener to be set to auto-close after a user-set time
from 1 to 9 minutes. This function requires the use of Photo Cell Beam Sensors.
Burglar Alarm: the opener can be connected to a special alarm monitor. This alarm will
siren will activate should the door be forcibly opened outside normal operation.
Fault checking: using the on-board diagnostics LED’s, a set of codes will determine
possible faults or errors.
Easy operation: All opener settings are indicated on the LED display in simple codes.
