2.
Remove the four screws that fix the drive carrier in place and then take the drive carrier out.
3.
Attach a SATA hard drive to the drive carrier with the four screws supplied in the package.
4.
Place the carrier with the hard drive into the housing (Step 1) and connect the hard drive via the
SATA connector with the fitting of the carrier to the housing (Step 2).
Step 1 Place down the carrier with the hard drive locked in. It should be placed in the position
that is further away from the SATA connector. See the diagram below that the sliding hole
on the carrier should fit accurately into the leading boss on the housing.
Step 2 Slide and then gently push the carrier along the leading tracks with the hard drive towards
the SATA connector for it to connect.
Do not use excessive force
. Check for the accuracy
of placement of carrier on to housing and mounting of hard drive on to the carrier if the
SATA connection is not smooth and accurate.
