WIRE CONNECTIONS FOR MAIN CONNECTOR HARNESS
PIN
Connect2Car
Unit Wire
Connection point
Comments
1
BLACK
Reserved. Ignore
2
BLUE
Reserved. Ignore
3
GREEN
Reserved. Ignore
4
BLUE
Reserved. Ignore
5
GREEN
Reserved. Ignore
6
BLUE
Reserved. Ignore
7
GREEN
Reserved. Ignore
8
WHITE
Arm input (negative input)
Connect to Arm output of Aftermarket/factory Alarm
9
ORANGE
Reserved. Ignore
10
WHITE
Siren/Door monitor wire/
Alarm Monitor Wire. (positive
input)
Connect to the siren activation output, door pin sensor or
dome light output or any sensor you want to trigger an Alarm
alert when unit is armed. Once this input is triggered, it will
send an alert to the owners phone.
11
ORANGE
ignore
12
WHITE
Disarm input (negative input)
Connect to Disarm output of Aftermarket/factory Alarm
13
ORANGE
Reserved. Ignore
14
WHITE
Ignition Detect (Positive input)
Connect to the Ignition wire of the vehicle to detect when
ignition is on.
15
ORANGE
Reserved. Ignore
16
YELLOW
Ignition Kill/ Starter kill
(negative output)
Should be connected to an ignition kill, starter interrupt.
(For
preferred instant shut down of Vehicle, connect this as an
ignition kill via a relay)
17
ORANGE
Reserved. Ignore
18
BLACK
5V accessories Ground
(optional)
19
PURPLE
5V accessories output
(optional)
20
YELLOW
Remote Start Trigger
/Activation. Negative output
Connect to
Remote Starter Activation input of aftermarket
remote starter
21
YELLOW
Door Lock Output/Arm.
Negative output
Connect to
Door Lock.
(if available)
Also connect to
Arm wire
output
of Factory Alarm or Aftermarket Alarm.
22
YELLOW
Door Unlock Output/Disarm
Negative output
Connect to
Door Unlock
(if available)
Also connect to
Disarm
wire output
of Factory Alarm or Aftermarket Alarm
23
BLACK
Ground
Connect to Battery Negative
24
RED
Power 12V
Connect to Battery Positive
