Standard
Setup
Run Client Emulator
After all desired changes have been made, select this option to return to the Twin Client
main menu. Then press any key to establish the Telnet session and begin emulation.
Refer to
Starting a Telnet Session
under
Quick Start
for further instructions.
Authorizing PowerNet
Each PowerNet Twin Client will run for 30 minutes at a time without authorization.
Uninterrupted operation for a production environment is the result of authorizing the
software. Authorization codes are obtained from the Connect web site at
Partner Services
page. Click on the
Generate
Authorization
icon at the top of the page.
Automatic Authorization
The Twin Client Manager can automatically authorize the terminal over the wireless
network if the following requirements are met:
•
A PC running Twin Client Manager is connected to the wire LAN segment with at
least one access point within range of the terminal.
•
The System ID of the PC on which Twin Client Manager is installed has been used to
obtain a site license Authorization code from the Connect web site.
To obtain the System ID of the Twin Client Manager, click on the
Authorization
option
in the
Settings
menu, as shown below.
The Authorization window is displayed as shown below.
Supported Equipment Manual
•
May, 2006
2-21