E-24
E
1.10 OSD System Overview
MENUS
FUNCTION DESCRIPTION
BRIGHTNESS
Adjust the image brightness.
Setting the brightness too high will cause the image to bloom or flare, too
low will decrease the visible light
CONTRAST
Adjust the image contrast.
Setting the Contrast too high or too low will causes loss of some greyscales.
PHASE
Adjust the phase level.
Do not adjust manually - fine adjustment will occur automatically during
auto adjustment. When the phase value is wrong, the image may have
interference from “noise”.
CLOCK
Adjust the sampling frequency.
Do not adjust manually - fine adjustment will occur automatically during
auto adjustment. When the frequency value is wrong, the horizontal image
may be the wrong size or have interference from “noise”.
BACKLIGHT
Adjust the backlight dimming level. Setting the backlight too low will
cause a dark image and too high will decrease the backlight lifetime.
AUTO ADJUST
Fit to the most appropriate screen on the D-SUB Analog signal.
SHARPNESS
Adjusts the sharpness of the video image
SATURATION
Changes the tone of the color
COLOR
Change the tone richness of the color
COLOR TEMP
6500K
Default 6500K color setting
COLOR TEMP
5600K
Default 5600K color setting
COLOR TEMP USER
Default 6500K color setting. When USER is selected, Red, Green and
Blue values are changeable by the user.
H POSITION
Adjusts the Horizontal (left / right) position of the image. It will return to
the default state when executing AUTO ADJUST OR RESET SETTINGS
Summary of Contents for Linvatec VP4726
