manualshive.com logo in svg

Congatec Qseven conga-QA5, User Manual, Page: 16 / 61

Share
Download
Congatec Qseven conga-QA5 User Manual Download Page 16

Copyright 

© 

2017 

congatec 

AG 

 

      QA50m10 

       

16/61

2.5 

Power Consumption

The power consumption values were measured with the following setup:

 

•

conga-QA5 COM

 

•

modified congatec carrier board

 

•

conga-QA5 cooling solution

 

•

Microsoft Windows

®

 10 (64-bit)

 

Note

The CPU was stressed to its maximum workload with the Intel

®

 Thermal Analysis Tool.

Table 4  

Measurement Description

The power consumption values were recorded during the following system states:

System State

Description

Comment

S0: Minimum value

Lowest frequency mode (LFM) with minimum core voltage during 

desktop idle. 

S0: Maximum value

Highest frequency mode (HFM/Turbo Boost). 

The CPU was stressed to its maximum frequency.

S0: Peak value

Highest current spike during the measurement of “S0: Maximum 

value”. This state shows the peak value during runtime.

Consider this value when designing the system’s power supply to 

ensure that sufficient power is supplied during worst case scenarios.

S3

COM is powered by VCC_5V_SBY.

S5

COM is powered by VCC_5V_SBY.

 

Note

1.  The fan and SATA drives were powered externally.

2.  All other peripherals except the LCD monitor were disconnected before measurement.

Summary of Contents for Qseven conga-QA5






























































Reviews:

No comments