Copyright
©
2014
congatec
AG
TS87m13
122/124
drive is locked and POST continues as normal. If the user enters the correct password, the drive is unlocked until the next reboot.
In order to ensure that the ATA security features are not compromised by viruses or malicious programs when the drive is typically unlocked,
the BIOS disables the ATA security features at the end of POST to prevent their misuse. Without this protection it would be possible for viruses
or malicious programs to set a password on a drive thereby blocking the user from accessing the data.
Note
If the user enables password support, a power cycle must occur for the hard drive to lock using the new password. Both user and master
password can be set independently however the drive will only lock if a user password is installed.
11.8
Save & Exit Menu
Select the Save & Exit tab from the setup menu to enter the Save & Exit setup screen. You can display a ‘Save & Exit’ screen option by
highlighting it using the <Arrow> keys.
Feature
Description
Save Changes and Exit
Exit setup menu after saving the changes. The system is only reset if settings have been changed.
Discard Changes and Exit
Exit setup menu without saving any changes.
Save Changes and Reset
Save changes and reset the system.
Discard Changes and Reset
Reset the system without saving any changes.
Save Options
Save Changes
Save changes made so far to any of the setup options. Stay in setup menu.
Discard Changes
Discard changes made so far to any of the setup options. Stay in setup menu.
Restore Defaults
Restore default values of all the setup options.
Boot Override
List of all boot devices currently
detected.
Select device to leave setup menu and boot from the selected device. Only visible and active if Boot Priority
Selection setup node is set to “Device Based”.
