Copyright
©
2014
congatec
AG
TS87m13
105/124
Note
This menu displays only the SATA ports on which the optical or hard disk drive is detected.
11.4.12 USB Submenu
Feature
Options
Description
USB Devices
No option
Displays the detected USB devices.
xHCI Mode
Smart Auto
Auto
Enabled
Disabled
Manual
Select mode for ports:
‘Enabled’ - USB ports will function in USB 3.0 mode but require driver on the OS. USB ports will not function in
pre-OS time if USB 3.0 Support in BIOS is disabled (see the USB 3.0 Support in BIOS item).
‘Disabled’ - USB ports will function in USB 2.0 mode only and routed to the EHCI1 controller.
‘Auto’ - USB ports will initially function in USB 2.0 mode but the operating system driver can switch to USB 3.0.
‘Smart Auto’ - Identical to ‘Auto’, except the BIOS will take over the operating system driver setting after each
restart.
EHCI1 (Ports USB0-5)
Disabled
Enabled
Enable or disable EHCI1 (USB 2.0) controller.
Note:
One EHCI controller must always be enabled.
EHCI2 (Ports USB6-7)
Disabled
Enabled
Enable or disable EHCI2 (USB 2.0) controller.
Note:
One EHCI controller must always be enabled.
USB2.0 Pins Routing
Route Per-Pin
Route all Pins to EHCI
Route all Pins to xHCI
Route USB2.0 pins to EHCI or xHCI controller.
USB2.0 Port 0 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 1 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 2 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 3 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 4 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 5 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 6 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.
USB2.0 Port 7 Pins
Route to EHCI
Route to xHCI
Route the respective USB2.0 port to EHCI or xHCI controller.