14
TROUBLESHOOTING.
1.Changing the batteries.
To change the computer batteries, please slide
the computer from the computer holder, remove the battery cover on the back
of the computer console, and remove the batteries. Replace with 2 x aa
batteries. Finally, put the cover back on the console, and slide the computer
back onto the computer holder.
2.Computer not working correctly.
If your computer is not working
correctly, please check whether the computer sensor wire is plugged into the
computer. If you have checked the above and the computer is still not
working, then please make sure the batteries are still working and that they
are installed correctly in the computer.
3.No resistance.
If there is no tension resistance, please turn the tension
adjustment knob to its lowest level, and then go to the friction belt buckle which
is located on top of the fan wheel beneath the center beam. Loosen the friction
belt, pull it through the buckle until you can feel some resistance on the belt,
and then lock it back around the buckle. Now mount your aero elliptical strider
and turn the pedals. If you find it is now too tight, go back to the friction belt
buckle and loosen the belt slightly.
