Conexant H08-15350, Reference Manual

Page: 98 / 120

Command Reference Manual
Conexant
1118
5-4
5.2 Voice Commands
5.2.1 Configuration Commands
5.2.1.1 +FCLASS=8 - Select Voice Mode
+FCLASS=8 selects the Voice Mode. The Voice Mode commands and responses described in this section are applicable
when cFCLASS=8. (See Section 3.2.1.2 for the definition of the FCLASS command.)
5.2.1.2 +FCLASS=80 - Select VoiceView Mode
+FCLASS=80 selects the VoiceView Mode. The Voice Mode commands and responses described in this section are
applicable when cFCLASS=80. (See Section 3.2.1.2 for the definition of the FCLASS command.)
5.2.1.3 +VNH - Automatic Hang-up Control
This command enables or disables automatic hangups.
Syntax
+VNH=<hook>
Defined Values
<hook> Decimal number corresponding to the selected option.
0 The modem enables automatic hangups as is normal in other modes.
1 The modem disables automatic hangups usually found in the other non-Voice Modes.
2 The modem disables automatic hangups in the other non-Voice Modes. The modem
performs only a “logical” hangup (returns to OK result code).
Reporting Current or Selected Values
Command: +VNH?
Response: +VNH: <hook>
Example: +VNH: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VNH=?
Response: +VNH: (<hook> range)
Example: +VNH: (0-2)
Result Codes
OK <hook> = 0-2.
ERROR Otherwise.