CONDTROL Vector 100, User Manual

Page: 6 / 37

User manual
LASER DISTANCE METER
10
EN
11
User manual
LASER DISTANCE METER EN
Vector 100 CONDTROL Vector 100 CONDTROL
MEASUREMENTS
Single distance measurement
Short press The device will switch on.
Short press
Laser beam will switch on.
Point the laser beam at the object of measurement.
Short press Make a single distance measurement.
- Measurement result
Short press Delete the last measurement result.
Continuous distance measurement (Tracking)
Press and hold
during 2 seconds
Activate continuous measurement mode. The laser
beam is also activated. Symbol appears
on the display.
- maximal value
- minimal value
- current value
Short press
or
Stop continuous measurement.
The last measured values are shown on the display.
Short press Exit the mode.