CONDTROL Vector 100, User Manual

Page: 9 / 37

User manual
LASER DISTANCE METER
16
EN
17
User manual
LASER DISTANCE METER EN
Vector 100 CONDTROL Vector 100 CONDTROL
Calculation of horizontal distance by tilt sensor
Short press Enter menu of functions.
Short press /
Select function “Calculation
of horizontal distance by tilt sensor”
Short press
Symbol will appear on display. Laser beam
is on.
Short press Take first measurement (hypotenuse).
- tilt angle value (measured)
- hypotenuse (measured)
- cathetus/vertical distance (calculated)
- cathetus/horizontal distance (calculated)
Short press Exit the mode.
Point to point measurement
Short press Enter menu of functions.
Short press / Select function “Point to point”
Short press
Symbol will appear on display.
Laser beam is on.
Short press Make the first measurement (distance to point A)
Short press
Make the second measurement (distance to
point B)
– distance to point A (measured)
– distance to point B (measured)
– distance between points A and B (calculated)
Short press Exit the mode.