43
Operator Interface
Nortec EL
2582954_D_EN_1811_Nortec-EL_OM
Communication Menu
Each tab under the Communication menu is discussed below. Refer to
for the menu
structure.
Remote Enable Tab
–
Allow Remote Disable:
allows you set whether steam
production of the humidifier can be remotely disabled via
the BMS.
Options:
Yes
– remote disable permitted.
No
– remote disable not permitted.
Factory setting:
Yes
Network Parameters Tab
The following settings are used only for communications via
the integrated BACnet IP protocol, Condair Online and web
pages.
–
IP Type:
allows you to select how the IP address settings
are assigned.
Options:
DHCP
– automatically acquire net
-
work address settings.
Note:
After
five unsuccessful attempts to acquire
the address, the system will revert to
Fixed assignment.
Fixed
– manually configure the net
-
work address and settings.
Factory setting:
DHCP
–
IP Address:
allows you to manually set the IP address.
Set the IP address only if
is set to "Fixed".
–
Subnet Mask:
allows you to manually set the IP subnet
mask for the IP network.
Note:
Set the subnet mask only if
–
Default Gateway:
allows you to manually set the default
gateway for the IP network.
Note:
Set the default gateway
only if
Summary of Contents for Nortec EL-Series
