Condair ME series, Addendum Manual

Page: 9 / 16

9 Installation work
5. Plug the sensor cable into the conductivity probe and secure it in place by screwing down the collar
of the plug onto the conductivity sensor.
6. Run the sensor cable out of the AHU to the Condair ME control unit.
Note : The cable can be fed through one of the spare ports on the duct wall feed through that was
provided with the Condair ME Control humidifier (if the duct wall feed through was installed), other-
wise a suitable cable feed through must be installed (and sealed) by the customer.
7. Secure sensor cable with cable ties at suitable intervals along the cable run to the Condair ME control
unit.
Note : ensure sensor cable is placed in such a way that the insulation is not damaged by sharp
edges and so that it does not create a trip hazard or hinder correct maintenance of the components.