Condair ME series, Addendum Manual, Page: 5 / 16

5 For your safety
2 For your safety
General
Every person working with the conductivity monitoring system and the Condair ME Control must have
read and understood this addendum manual, and the Condair ME Control installation manual and op-
eration manual, before carrying out any work.
Knowing and understanding the contents of the manuals is a basic requirement for protecting the person-
nel against any kind of danger, to prevent faulty operation, and to operate the unit safely and correctly.
All ideograms, signs and markings applied to the unit must be observed and kept in readable state.
Qualification of personnel
All work described in this addendum manual may only be carried out by specialists who are well
trained and adequately qualified and are authorised by the customer .
For safety and warranty reasons any action beyond the scope of this manual must only be carried out
by personnel with appropriate industry recognised qualifications or training.
It is assumed that all persons working with the conductivity monitoring system and the Condair ME
Control are familiar and comply with the appropriate local regulations on work safety and the prevention
of accidents.
Intended use
The conductivity monitoring system is intended exclusively for conductivity measuring of the water in the
water tank of the Condair ME Control. Any other type of application, without the written consent of the
manufacturer, is considered as not conforming with the intended purpose and may lead to the Condair
ME Control becoming dangerous.
Operation of the equipment in the intended manner requires that all the information contained in
this addendum manual as well as in the Condair ME Control installation manual and operation
manual are observed (in particular the safety instructions) .
Danger that may arise from the Condair ME Control
DANGER!
Risk of electric shock!
The control unit of the Condair ME Control contains live mains voltage. Live parts may be exposed
when the control unit is open. Touching live parts may cause severe injury or danger to life.
Prevention:
Before commencing any work on the conductivity monitoring system and the control unit
disconnect the mains supply voltage to the control unit via the electrical isolator in the mains supply
line, and secure electrical isolator in “Off” position against inadvertent switching on.