Condair ME series, Addendum Manual, Page: 12 / 16

12 Configuration
5 Configuration
If the conductivity sensor is retrofitted in an existing Condair ME Control system, the parameters for
conductivity or temperature controlled dilution cycle must be set in the user level of the control software.
Configuration process
Settings for conductivity controlled dillution cycle:
Password: 8808
Set Mode to:
Condu Limit
Set Dilution µS Limit to:
desired value
Settings for temperature controlled dillution cycle:
Password: 8808
Set Mode to:
H2O Temp
Set Dilution H2O Temp to:
desired value