6.3
Clearance Requirements
A
B
C
D
E
Figure 3 -
Clearances
Table 4:
Clearances for Condair Condair DA Desiccant Dryer (all units). Refer to
.
A
B
C
D
E
0 in (0 mm)
0 in (0 mm)
15.7 in (400 mm)
39.4 in (1000 mm)
0 in (0 mm)
6.4
Site Requirements
Prepare the Condair DA Series Desiccant Dryer for installation by ensuring the following site requirements are
satisfied. Report any discrepancies to your Condair representative.
Ensure that the installation of the Condair DA Series Desiccant Dryer is compliant with all applicable local
regulations and codes.
6.4.1
Air Supply Requirements
Filters in the dehumidifier unit help preserve the longevity of the unit and helps prevent dangerous situations. The
unit uses a heater for reactivation air and a silica gel rotor, so care must be taken to reduce or prevent
contaminants from entering the unit. Such contaminants may include sugar or wood "dust", or flammable vapors.
For specific situations and filters, please contact your Condair representative.
6.4.2
Power Supply Requirements
l
Mains powered
l
Electrical disconnect switch
6.5
Installation
The Condair DA Desiccant Dryer may be installed in the dehumidified room, or in a separate room. To obtain the
best performance, equip diffuser to fan outlets.
IMPORTANT!
Ensure that the rooms supplying air to the dehumidifier and rooms requiring dry air from
the dehumidifier are properly vented to reduce formation of pressure imbalance. Install dampers in the
process air duct to correct the dry air volume.
6.5.1
Installing the unit in the room to be dried
In this set-up, the unit is placed in the room needing dehumidification.
Condair DA
2593630_A_EN_2003_DA_IOM
Installation and Planning | 23
Summary of Contents for DA 1400
Page 6: ...This page intentionally left blank...
Page 48: ...Appendix 2593630_A_EN_2003_DA_IOM Condair DA APPENDIX...
Page 55: ...Notes...
Page 56: ......
