Condair DA 1400, Installation, Operation And Maintenance Manual

Page: 8 / 58

8 | Introduction
2593630_A_EN_2003_DA_IOM
Condair DA
1.3 Receiving and Storage
1.3.1 Inspection
After receiving the shipment, inspect the goods as follows:
l
Inspect the shipping boxes for damage. Report any shipping box damages to the shipping
company without delay.
l
Check the goods against the packing slip to ensure that all items have been delivered. Report
any shortages to your Condair representative within 48 hours of receipt of the goods. Condair
does not assume responsibilities for any shortages beyond this period.
l
Unpack the parts/components and check for any damage. If parts/components are damaged,
notify the shipping company immediately.
l
Verify the model type on the specification label to ensure that it is suitable for your installation.
Refer to
"Model Designation" on page 13 .
1.3.2 Storage, Packaging, and Transportation
Storage
Store the Condair DA Series Desiccant Dryer in its original packaging inside a protected area that meets the
following requirements until it is installed, or if it needs to be stored for an extended period of time:
l
Room temperature: -34 to 104 °F (-30 to 40 °C)
l
Room humidity: 0 to 90% RH (non-condensing)
Transportation
For optimum protection always transport the unit and components in their original packaging, and use appropriate
lifting/transporting devices (ex. forklift).
Lifting or handling must be carried out by trained and qualified personnel. Ensure that lifting has been fully
planned and assessed for possible risks, and that equipment is checked and operated by a skilled operator. It is
the customer's responsibility to ensure that operators are fully trained to handle heavy goods and to enforce any
applicable lifting regulations.
The unit should be protected from rain and snow, and stand upright.
Avoid placing other goods on top of the unit.
Packaging
Keep the original packaging of the unit/components for later use.
If the packaging needs to be disposed, observe local regulations on waste disposal. Please recycle packaging
where possible.
1.4 Safety Precautions
IMPORTANT! Never use the dehumidifier without the filters. The filters help prevent contamination of
the desiccant rotor and reduces capacity losses. Missing filters will lead to premature failure of the
heaters and desiccant wheel.
The dehumidifier is NOT rated to be installed in rooms that require explosion-proof equipment.
The service panel on the dehumidifier should remain closed at all times, except during servicing. Disconnect
the unit from the supply source before servicing the unit.