Condair DA 1400, Installation, Operation And Maintenance Manual

Page: 25 / 58

-A-
-B-
-C-
-A- -B- -C-
1
2
4
3
5
Figure 4 -
Connections for the Unit
1. Process air connection ( "Connecting the
Process Air Duct" on the next page )
Ø 15.7 in (400 mm)
2. Dry air connection
Ø 12.4 in (315 mm)
3. Reactivation air connection ( "Connecting the
Reactivation Air Duct" on the next page )
Ø 7.9 in (200 mm)
4. Wet air connection ( "Connecting the Wet Air
Duct" on the next page )
Ø 7.9 in (200 mm)
5. Service
panel
6.5.3 Safety
Observe all safety precautions and comply with local installation codes. Refer to "For Your Safety" on page 10 .
6.5.4 Mounting the Dehumidifier
Refer to
"Mounting Requirements"
for mounting requirements.
The Condair DA Desiccant Dryer comes equipped with legs and is intended to be mounted indoors and on the
floor. It is recommended to bolt the legs down to the floor.
Mounting considerations:
l
Ensure that there is enough clearance around the unit for ducting and servicing. Refer to
"Clearance Requirements" on page 23 .
l
Ensure that the unit is horizontal and on a level surface.
l
Ensure that the unit is secured (ex. bolted).
Condair DA
2593630_A_EN_2003_DA_IOM
Installation and Planning | 25