PC-POD-CP-006-v01
PC-POD-CP-006-v01
Printed copies are not controlled.
Page
34
of
35
9.6
Data Acquisition Window with RRI Data
9.6.1
Controls
The RRI Mode Control Frame displays the current RRI Mode, Session Time, and Event
Control.
NOTE: FOR RRI DATA ACQUISITION, THERE MUST BE AN ECG SIGNAL
PRESENT.
9.6.1.1
RRI Mode Control
Displays the current RRI mode and mode status.
This control allows the user to activate and deactivate the RRI mode.
9.6.1.2
Session Timer
Supplies a time reference for the RRI data acquisition
event marks. This timer is automatically activated when any RRI data
acquisition is set to “Active”. The timer may also be started by the user
9.6.1.3
Event Control
Allows the user to create and display event marks
that are to be used for HRV analysis.
9.6.2
RRI Data Acquisition
9.6.2.1
If the RRI acquisition mode is Continuous with “No Time Limit”:
9.6.2.1.1
To start RRI data acquisition, click “Start RRI Acquisition”.
9.6.2.1.2
To stop RRI data acquisition, click “Stop RRI Acquisition”.
9.6.2.2
If the RRI acquisition mode is Continuous “With Time Limit”:
9.6.2.2.1
To start RRI data acquisition, click “Start RRI Acquisition”.
9.6.2.2.2
To stop RRI data acquisition, click “Stop RRI Acquisition” or
data acquisition will stop when the time limit is reached.
9.6.2.3
If the RRI acquisition mode is “With Each EA”:
9.6.2.3.1
To activate RRI data acquisition, click “Start RRI Acquisition”.
In this mode the session timer will not start and RRI data will
not be acquired until the first EA sample.
9.6.2.4
To manually terminate RRI data acquisition:
9.6.2.4.1
Click the “ACTIVE-click here to Stop” button under “RRI
Mode” to stop data acquisition. In this mode, the “Stop RRI
Acquisition” button is disabled.
NOTE: RRI acquisition can be aborted at any point, without saving the data, by
double clicking on the “ACQUIRING” indicator in the “RRI Data Acquisition” box.
