PC-POD-CP-006-v01
PC-POD-CP-006-v01
Printed copies are not controlled.
Page
25
of
35
9.3.4
If you want to set it to a pre-determine time interval, under the “Total Run
Time For Continuous/ Non-Stop EA Acquisition Mode” select “Limit to” and
choose the total time under “Hours” and “Minutes”.
9.3.4.1
The “Continuous Time Intervals” mode offer a Block Mode option that
permits the user to acquire and label data samples with an ID Code. To
turn this option on, select “Limit to”, then check “BLOCK MODE”
under “Block Run Time For Continuous/ Non-Stop EA Acquisition
Mode”.
When this option is selected and the “OK” button is pressed, a screen will
appear allowing for the selection of a specific ID Code.
NOTE: If there are any parameters left to change in the prior screen, do so prior to
clicking “OK” as data acquisition will begin as soon as “OK” is selected.
9.3.4.2
Under the “Ensemble Average MODE” select the mode by which data is
to be collected.
