32
5.4.1.2 Port Configuration
Web Port: This is the port that you will use to log in remotely to the Wireless NVR (e.g. using the Web Client). If the
default port 80 is already taken by other applications, please change it.
Client Port: This is the port that the Wireless NVR will use to send information through. If the default port 9000 is
already taken by other applications, please change it.
RTSP Port: Default is 554, if the default port 554 is already taken by other applications, please change it.
UPNP: If you want to log in remotely to the Wireless NVR using Web Client, you need to complete the port
forwarding. Enable this option if your router supports the UPnP. You need to enable UPnP both, on Wireless NVR and
router. In this case, you do not need to configure manually port forwarding on your router. If your router does not
support UPnP, make sure the port forwarding is completed manually
P2P: Open/Close P2P
