33
… Format Relay 2 O2..
O2 20.9%
..Format Fault Relay...
O2 20.9%
NORMAL
20.9%
INVERT
20.9%
..Format Fault Relay...
O2 20.9%
…Set Formats…
O2 20.9%
After entering the relay state push the joystick left to enter the setting. The display will
scroll the following:
From this main menu, pushing the joystick down will select the next sub menu to adjust
the fault alarm relay state. The digital display will scroll the following:
To change this value, push the joystick right to display the relay state. The display will
Indicate
NORMAL.
This is the factory default state for the fault relay. Pushing the
joystick down will change the relay state from NORMAL to INVERT.
NOTE: When the fault relay state is changed to INVERT, the internal horn and
yellow alarm LED will illuminate.
After entering the relay state push the joystick left to enter the setting. The display will
scroll the following:
Push the joystick left again to get back to the previous. The display will scroll the following: