28
Enabled
O2 20.9%
…Enable User Password…
O2 20.9%
…Reset User Password…
O2 20.9%
…Password Reset to factory Default…
O2 20.9%
Oxygen
O2 20.9%
5.4.1 Enable User Password
This menu permits the user to activate or disable the password function on the Oxygen
monitor. Push the joystick down.
Enable User Password
will scroll on the first line of
the digital display
Push the joystick right to display the status. If enabled it will display
Enabled
Push the joystick up or down to change the status. Once enabled or disabled is selected, Push
the joystick in the center to enter the new status. If entered correctly the display will scroll
Enable User Password
5.4.2 Reset User Password
This menu permits you to reset the password back to 557, as set at the factory.
Push the joystick right to display the menu,
Reset to factory Default.
Push the joystick in (like a doorbell) to reset the password back to 557. Push the joystick
left 4 times to go back to the measuring mode.
NOTE: If you lose your password please contact CONCOA with your serial number
or DTM number.
…Enable User Password…
O2 20.9%