
27
…Re-Enter New Password...
O2 20.9 %
2
20.9%
253
O2 20.9%
…New Password Entry OK…
O2 20.9%
7.
Push the joystick in the center to enter the password. This will display the next command,
Re-Enter New Password
8.
Push the joystick to the right to enter the input screen.
The letter A will appear and flash.
9.
Push the joystick up or down to enter the first digit. The display is an alphanumeric display
and toggles from A through Z followed by 0 to 9. The character to be entered will flash.
10.
Push the joystick again to the right to select the second entry. Push the joystick up or down
to select the second digit. The character being entered will flash and the first character entered
will remain lit.
11.
Push the joystick again to the right to select the third entry. Push the joystick up or down to
select the third and final digit. The character being entered will flash and the first and second
characters entered will remain lit. You are now ready to enter the 3-digit password.
12.
Push the joystick in the center to enter the password. If you entered it correctly the
display will scroll
“New Password Entry OK”.
NOTE: If on the second entry the password entered was not the same as the first, the
display will take you
back to the “Re-enter Password Screen.” You’ll need to repeat
steps 2 through 11. If you do not enter the password correctly, the monitor remembers
the last password that was properly input.
O2 20.9%
25
O2 20.9%