Conceptronic Wireless 54Mbps USB Adapter
16
Connection Status will display Connected or Disconnected depending on the
status of the WLAN link.
The SSID is the IEEE 802.11 Service Set Identifier of the WLAN Access Point or
WLAN peer that the C54RU is currently connected to.
The BSSID is the MAC or hardware address of the WLAN Access Point or WLAN peer
that the C54RU is currently connected to.
Network Type displays either Infrastructure
−
if the C54RU is connected to an
Access Point, or Ad-hoc
−
if the C54RU is connected to a WLAN peer.
Frequency displays either 802.11g-2.4GHz or 802.11b-2.4GHz, depending upon
which WLAN standard is in use by the device the C54RU is currently connected to.
Data Encryption displays Enable if WEP is enabled and in use for the current WLAN
connection. Otherwise, Disable is displayed.
Speed displays the current theoretical top data rate of the current WLAN
connection. The displayed maximum speed is related to the signal strength.
Authentication State will display Connected if you have provided either the
correct authentication information, or if authentication is disabled on the current
WLAN link.
Signal Strength displays a bar graph representation of the relative strength of the
signal used to maintain the current WLAN link. Maximum data rates are achieved
only when a maximum signal strength exists on the WLAN link.
Hardware Information displays the C54RU’c MAC address and the Regulatory
Domain (the region of the world that issues the radio use regulations) that it is
currently configured for.
Advance State displays whether the radio is on or off and whether the Turbo Mode
is enabled or not.
Click OK
to exit the WLAN Utility. Clicking Cancel will not exit the WLAN Utility.
