Conceptronic Wireless 54Mbps USB Adapter
22
Installing the WLAN Driver
Only
in Windows XP
Note:
Follow these instructions to install the driver software Windows XP needs to
allow your C54RU to function. This will not install the WLAN Utility provided on
the C54RU install CD, and you will need to use the Windows XP built-in WLAN
support software to configure and manage your WLAN link.
Note:
If you want to use the WLAN Utility provided with your C54RU to configure
and manage your WLAN link, follow the instructions for installing your C54RU for
Windows 2000 (and other Windows versions) given in the sections above. You will
then need to review the section titled
Enabling the WLAN Utilities in Windows
XP
, below.
Start your PC normally.
Insert the C54RU into an available USB slot and put the Installation CD into your
computer’s CD-ROM drive. You can then follow the instructions in the Found New
Hardware Wizard, as shown below, to install your C54RU on a computer with the
Windows XP operating system.
When you install the C54RU into your computer, the Found New Hardware Wizard
will begin by showing the screen below.
