misting
Press the misting button to release water from the misting nozzle. A sufficient amount of water is required in
the tank to activate this function.
OPERaTING INSTRUCTIONS
Please read these instructions carefully before you start using the product.
•
Remove all stickers from the ironing surface and packaging material before you start to use the product.
•
Test the iron on a piece of old cloth before the first ironing to make sure that the ironing surface and water
tank are perfectly clean.
•
Some steam may be released during the initial use. This will disappear in a few moments.
Setting the temperature
First identify the material you are going to iron (according to the international code of textiles). Textiles
requiring lower temperatures should be ironed first. Continue with textiles requiring higher temperatures.
Most textiles are marked according to this code.
NOTE::
The
symbol on the tag means:
This fabric must not be ironed!
Tag with ironing info
Fabric type
Temperature
setting
Steam setting
Synthetic
Polypropylene
Polyurethane
Polyamide
Polyester
Viscose
Silk
Wool
Cotton
Linen
max
mIN
DRy
STE
am
Мax. STEam
Storing the iron
After use disconnect the iron from the mains, empty the remaining water, set the steam controller to the
minimum position, set the temperature controller to the “Min” position, and let the iron cool. Keep the cold
iron in a vertical and stable position in a safe, dry place.
EN
36
ZN8012
