Concept2 MNV4745, Manual

Page: 160 / 174

160
EN
MNV4745
Dimensions and fastening of the cover plate on the door of the dishwasher
• The dimensions and location of holes on the cover plate are shown in Fig. 15. The dimensions are given in mm.
• Attach the handle to the cover plate and make sure the screw heads are screwed properly and that they do not
stick out of the back side of the plate.
• Put the cover plate on the door of the dishwasher (Fig. 15a).
• Fasten the cover plate using the screws (Fig. 15b).
• Unscrew the four short screws from the inner side of the door (Fig. 15b).
• Screw the four long screws instead of the short ones. Now the cover plate is fastened to the appliance door
(Fig. 15b).
Fig . 15
Fig. 14a Fig. 14b
Remove 4 short screws
Fasten 4
long screws