Concept2 MNV4745, Manual

Page: 151 / 174

151
EN
MNV4745
• Long and sharp cutlery (carving knives) must be placed horizontally in the upper rack.
• Do not wash very small items in the dishwasher as they can easily slip out of the racks.
• Do not overload the dishwasher!
Adjusting the height of the upper rack
• The height of the upper rack can be adjusted.
• To adjust the height of the upper rack, overturn the handles on the sides of the rack (see Fig. 6).
• Keep overturning the handles until they stop so they are locked properly.
Upper rack
The upper rack is suitable for:
• glasses,
• coffee and tea cups,
• saucers,
• small bowls and plates,
• shallow pans.
Make sure that the loaded dishware cannot be
overturned by running water from the spray arms.
Stand
1. To adjust the height of the upper basket, grasp the
upper basket in the centre of each side and simply
lift it until it clicks into place in the upper position.
It is not necessary to raise the adjustment handle
2. To lower the upper basket, raise the adjustment
handles on both sides to release the basket and
lower it to the lower position.
Stand
• Glasses and tall glasses lean on the edge of the stand
(not on other dishware).
• Do not put any long items, serving and salad cutlery,
ladles and kitchen knives in a way that they could
impede the rotation of the spray arms.
• You can tilt the stand and adjust it in height (Fig.9).
Fig.9
Back side of the rack
Front side of the rack