![background image](http://html1.mh-extra.com/html/conair/esew-0100d/esew-0100d_user-manual_2649041074.webp)
Corporate Office: 724.584.5500
Instant Access 24/7 (Parts and Service): 800.458.1960
Parts and Service
:
814.437.6861
65
Menu 1 – Process Control
Leaving/Entering Sensor Selection
There are two selections for the temperature control mode, Leaving Water Control or Entering Water Control. To
make a change from the current selection, simply press the mode of operation button. This will toggle between
the two options (Master Only).
If an external leaving water temperature is used the RTD sensors must be enabled. Typically, a Manifold RTD
temperature sensor is used when a combination leaving water temperature is being controlled, i.e. Master/Slave
or Dual Circuits.
Figure 49 – Process Control Screen