To use the press attachment, simply open the press attachment by
pushing the clip on the bottom of the nozzle away from you. The
press attachment should now be open. Place the nozzle and press
attachment at the top of the garment to be steamed, ensuring not
to place the press attachment too far over the garment. Close the
press attachment and hold the bottom of the garment taut. Slide
the nozzle and press attachment down the garment to create a
professional creased result.
To remove, hold the clip on the bottom of the attachment and pull
away from the nozzle.
USING THE STORAGE HOOK
The storage hook included with this steamer has two
uses:
1. Use it to hold the steamer nozzle when changing
garments on the hanger. Simply hook the back
of the nozzle onto the side of the storage hook
(Fig.P).Be careful when placing the steam nozzle
on this hook as steam will still be emitting from the
steamer, when the steamer is switched on. Always
attach and remove the steamer nozzle by handling
the cool-touch handle.
2. Use it as a storage hook to hold the two attachments when not
in use.
WHAT IS THE NANO-SILVER CERAMIC COATING ON THE NOZZLE
AND HOW DOES IT WORK?
The nozzle on this steamer has a lightweight stainless steel surface
that is coated with ceramic and nano-silver. The nano-silver ceramic
coating works in two ways:
1. Ceramic coating provides even heat and steam distribution over
the entire surface of the nozzle, helping to easily remove wrinkles
and reduce hotspots on fabric.
2. Micro particles of nano silver refresh and rejuvenate fabric and
remove unpleasant odours.
