![background image](http://html1.mh-extra.com/html/conair/cgs18a/cgs18a_manual_2649685013.webp)
CONNECTING THE ATTACHMENTS
Attachments should only be connected and removed from the
nozzle when the steamer is switched off and the nozzle has cooled
down. Once the steamer is switched off it should only take approx
15 to 30 seconds for the nozzle to cool.
This garment steamer includes two interchangeable attachments:
2-in-1 lint and bristle brush attachment for removing
fluff and hair from garments, home furnishings and
bedding. It is also great for fluffing up cushions, rugs
and woollen underlays.
Press attachment creates professional creased results
on pants, shirt sleeves and collars in the convenience
of your own home.
To attach the 2-in-1 lint and bristle brush to the nozzle, simply
align the bottom of the attachment with the bottom of the nozzle
(Fig.N). Push the top of the attachment forward until it clicks into
place. The 2-in1 lint and bristle bush should then be attached to the
nozzle and is now ready to use.
To use the 2-in-1 lint and bristle brush attachment, use it in the
same manner as you would steaming a garment, making sure the
white lint brush section and black brush bristles are making contact
with the fabric. Depending on the fabric being steamed, you may
make direct contact with the fabric.
To remove, simply unclick the top of the attachment and pull away
from the nozzle.
To attach the press attachment to the nozzle, turn the attachment
upside down so that the clip on the attachment is closest to the
handle of the nozzle (Fig.O). Align the bottom of the attachment
with the bottom of the nozzle. Push the attachment up until it
clicks into place. The press attachment should then be attached to
the nozzle and is now ready to use.