DeviceMaster Installation and Configuration Guide
: 2000594 Rev. F
RedBoot Procedures - 133
RedBoot Procedures
Establishing a Telnet Connection
Use the following procedure to telnet to the DeviceMaster.
1.
Open a telnet session, enter the DeviceMaster IP address.
If using Windows, you can use PortVision DX, see
Accessing RedBoot Commands in Telnet/SSH Sessions
2.
Press the
Enter
key if you did not program a password or type the password and press
Enter
.
Note:
The DeviceMaster does not come pre-programmed with a password.
3.
Type
reset
, and close the session.
4.
Open a new telnet session, enter the DeviceMaster IP address, and the password.
5.
Type
dis
to disable the Bootloader.
6.
Verify that the system responds with a
Loading disabled
message.