Comtrend Corporation WAP-EN1750R, User Manual

Page: 51 / 88

51
Authentication
Port
Set the UDP port used in the authentication
protocol of the RADIUS server. Value must be
between 1 – 65535.
Shared Secret Enter a shared secret/password between 1 –
99 characters in length. This should match the
“MAC-RADIUS” password used in IV-3-1-3-6 or
IV-3-2-3 .
Session Timeout Set a duration of session timeout in seconds
between 0 – 86400.
Accounting Enable or disable RADIUS accounting.
Accounting Port When accounting is enabled (above), set the
UDP port used in the accounting protocol of
the RADIUS server. Value must be between 1 –
65535.
IV-3-4-2 Internal Server
To use the Internal Radius Server as an additional authentication, configure
the “Authentication Method” in “Wireless Settings/Security” to
“IEEE802.1x/EAP”. Leave “Additional Authentication” set to “No additional
authentication”. Click “Apply” to save settings. (Example image below)
Next, Under “Radius/Radius Settings”, Select “Internal” for Radius Type. Click “Apply”
to save settings. (Example image below)