Comtrend Corporation WAP-EN1750R, User Manual

Page: 49 / 88

49
Enable WPS Check/uncheck this box to enable/disable
WPS.
WPS Current Status Displays “Configured” or “unConfigured”
depending on whether WPS and
security/encryption settings for the device
have been configured or not, either manually
or using the WPS button.
Self PIN Code Displays the WPS PIN code of the device.
SSID Displays the SSID (ESSID) of the device.
Authentication
Mode
Displays the wireless security authentication
mode of the device.
Passphrase Key Displays the wireless security authentication
key type.
Configure via Push
Button
Click “Start to Process” to activate WPS on the
access point. WPS will be active for 2 minutes.
WPS via PIN Enter the wireless client’s PIN code here and
click “Start to Process” to activate PIN code
WPS. Refer to your wireless client’s
documentation if you are unsure of its PIN
code.
IV-3-4 Radius
The “RADIUS” sub menu allows you to configure the access point’s RADIUS
server settings, categorized into three submenus: RADIUS settings, Internal
Server and RADIUS accounts.
A RADIUS server provides user-based authentication to improve security and
offer wireless client control – users can be authenticated before gaining
access to a network.
The access point can utilize both a primary and secondary (backup) RADIUS
server. External RADIUS servers can be used or the access point’s internal
RADIUS server can be used.
To use RADIUS servers, go to “Wireless Settings”
à
“Security” and
select the desired Authentication Method
à
“Additional
Authentication” and select “MAC RADIUS Authentication” (see
IV-3-1-3. & IV-3-2-3 ).