Comtrend Corporation VR-3060, User Manual

Page: 56 / 212

55
To remove an entry, tick the corresponding checkbox

in the Remove column and
then click the Remove Entries button, as shown below.
Heading Description
Enable RADVD Enable use of router advertisement daemon
RA interval Min(sec): Minimum time to send router advertisement
RA interval Max(sec): Maximum time to send router advertisement
Reachable Time(ms): The time, in milliseconds that a neighbor is
reachable after receiving reachability
confirmation
Default Preference: Preference level associated with the default
router
MTU (bytes): MTU value used in router advertisement
messages to insure that all nodes on a link use
the same MTU value
Enable Prefix Length Relay Use prefix length receive from WAN interface
Enable Configuration Mode Manually configure prefix, prefix length,
preferred lifetime and valid lifetime used in
router advertisement
Enable ULA Prefix Advertisement Allow RADVD to advertise Unique Local Address
Prefix
Randomly Generate Use a Randomly Generated Prefix
Statically Configure Prefix Specify the prefix to be used
Preferred Life Time (hour) The preferred life time for this prefix
Valid Life Time (hour) The valid life time for this prefix
Enable MLD Snooping Enable/disable IPv6 multicast forward to LAN
ports
Standard Mode
Blocking Mode In standard mode, IPv6 multicast traffic will
flood to all bridge ports when no client
subscribes to a multicast group even if MLD
snooping is enabled
In blocking mode, IPv6 multicast data traffic will
be blocked and not flood to all bridge ports when
there are no client subscriptions to any
multicast group
Enable MLD LAN
To LAN Multicast Enable/disable IPv6 multicast between LAN
ports