Comtrend Corporation VR-3060 User Manual Download Page 174

Page: 174 / 212

173

Appendix E - Printer Server

These steps explain the procedure for enabling the Printer Server.

NOTE

This function only applies to models with a USB host port.

STEP 1:

Enable Print Server from Web User Interface. Select Enable on-board
print server checkbox



and enter Printer name and Make and model.

Click the

Apply/Save

button.

NOTE

: The

Printer name

can be any text string up to 40 characters.

The

Make and model

can be any text string up to 128 characters.

STEP 2:

Go to

the

Printers and Faxes

application in

the

Control Panel

and

select the

Add a printer

function (as located on the side menu below).

Summary of Contents for VR-3060





















































































































































































































Search results

Summary of Contents for VR-3060

Reviews:

Related manuals for VR-3060

Brands by name

Popular brands

Comtrend Corporation VR-3060, User Manual

Search results

Summary of Contents for VR-3060

Reviews:

Related manuals for VR-3060

Brands by name

Popular brands