Comtrend Corporation VR-3060 User Manual Download Page 108

Page: 108 / 212

107

6.8 IP Tunnel

6.8.1 IPv6inIPv4

Configure 6in4 tunneling to encapsulate IPv6 traffic over explicitly-configured IPv4
links.

Click the

Add

button to display the following.

Click

Apply/Save

to apply and save the settings.

Options

Description

Tunnel Name

Input a name for the tunnel

Mechanism

Mechanism used by the tunnel deployment

Associated WAN Interface

Select the WAN interface to be used by the tunnel

Associated LAN Interface

Select the LAN interface to be included in the tunnel

Manual/Automatic

Select automatic for point-to-multipoint tunneling /
manual for point-to-point tunneling

IPv4 Mask Length

The subnet mask length used for the IPv4 interface

6rd Prefix with Prefix Length Prefix and prefix length used for the IPv6 interface

Border Relay IPv4 Address

Input the IPv4 address of the other device

Summary of Contents for VR-3060





















































































































































































































Search results

Summary of Contents for VR-3060

Reviews:

Related manuals for VR-3060

Brands by name

Popular brands

Comtrend Corporation VR-3060, User Manual

Search results

Summary of Contents for VR-3060

Reviews:

Related manuals for VR-3060

Brands by name

Popular brands