47
5.5 Security
To display this function, you must enable the firewall feature in WAN Setup.
For detailed descriptions, with examples, please consult
Appendix A - Firewall
.
5.5.1 IP Filtering
This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter
rules can be set and each applies at least one limiting condition. For individual IP
packets to pass the filter all conditions must be fulfilled.
NOTE:
This function is not available when in bridge mode. Instead,
MAC Filtering
performs a similar function.
OUTGOING IP FILTER
By default, all outgoing IP traffic is allowed, but IP traffic can be blocked with filters.
To add a filter (to block some outgoing IP traffic), click the Add button.
On the following screen, enter your filter criteria and then click Apply/Save.
Summary of Contents for VR-3030
