Comtrend Corporation VR-3030 User Manual Download Page 139

Page: 139 / 141

138

E2.5 IP over ATM (IPoA)

STEP 1: Click Next to continue.

STEP 2: Enter the WAN IP settings provided by your ISP. Click Next to continue.

STEP 3: This screen provides access to NAT, Firewall and IGMP Multicast settings.

Enable each by selecting the appropriate checkbox



. Click Next to

continue or click Back to return to the previous step.

ENABLE NAT
If the LAN is configured with a private IP address, the user should select this
checkbox



. The NAT submenu will appear in the Advanced Setup menu after

reboot. On the other hand, if a private IP address is not used on the LAN side (i.e.

the LAN side is using a public IP), this checkbox



should not be selected, so as to

free up system resources for improved performance.

Summary of Contents for VR-3030














































































































































Search results

Summary of Contents for VR-3030

Reviews:

Related manuals for VR-3030

Brands by name

Popular brands

Comtrend Corporation VR-3030, User Manual

Search results

Summary of Contents for VR-3030

Reviews:

Related manuals for VR-3030

Brands by name

Popular brands