117
NOTE:
The WAN services shown here are those supported by the layer 2
interface you selected in the previous step. If you wish to change your
selection click the Back button and select a different layer 2 interface.
STEP 4: For VLAN Mux Connections only, you must enter Priority tags, VLAN ID
tags. If service provider VLAN tag (S-VLAN Tag) or a customer VLAN tag (C-VLAN
Tag) is used select the corresponding TPID value.
STEP 5: You will now follow the instructions specific to the WAN service type you
wish to establish. This list should help you locate the correct procedure:
(1) For
PPP over ETHERNET (PPPoE),
go to page 118.
(2) For
IP over ETHERNET (IPoE),
go to page 124.
(3) For
Bridging
, go to page 130.
(4) For
PPP over ATM (PPPoA),
go to page 132.
(5) For
IP over ATM (IPoA),
go to page 138.
The subsections that follow continue the WAN service setup procedure.
Summary of Contents for VR-3030
