10
Chapter 2 Log In Procedure
2.1 Configure STATIC IP MODE
In static IP mode, you assign IP settings to your PC manually.
Follow these steps to configure your PC IP address to use subnet 192.168.0.x.
NOTE:
The following procedure assumes you are running Windows XP. However, the general steps
involved are similar for most operating systems (OS). Check your OS support documentation
for further details.
STEP 1
: From the Network Connections window, open Local Area Connection (
You may also access this
screen by double-clicking the Local Area Connection icon on your taskbar
). Click the
Properties
button.
STEP 2
: Select Internet Protocol (TCP/IP) and click the Properties button.
STEP 3:
Change the IP address to the domain of 192.168.0.x (5<x<255) with subnet mask of
255.255.255.0. The screen should now display as below.
STEP 4:
Click
OK
to submit these settings.