77
Step 2:
Set the WSC AP Mode.
Configured
is used when the NEXUSLINK 3111u
will assign security settings to clients.
Unconfigured
is used when an
external client assigns security settings to the NEXUSLINK 3111u.
NOTES:
Your
client may or may not have the ability to provide security settings to
the NEXUSLINK 3111u. If it does not, then you must set the WSC AP
mode to Configured. Consult the device documentation to check its
capabilities.
In addition, using Windows Vista, you can add an external registrar using
the
StartAddER
button (
Appendix E
- WSC External Registrar
has
detailed instructions).
II. NETWORK AUTHENTICATION
Step 3:
Select Open, WPA-PSK, WPA2-PSK, or Mixed WPA2/WPA-PSK network
authentication mode from the Manual Setup AP section of the Wireless
Security screen. The example below shows WPA2-PSK mode.
Step 4:
For the Pre-Shared Key (PSK) modes, enter a WPA Pre-Shared Key. You
will see the following dialog box if the Key is too short or too long.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
