30
5.2 WAN Service
This screen allows for the configuration of WAN interfaces.
Click the
Add
button to create a new connection. For connections on ATM or ETH
WAN interfaces see
Appendix G
- Connection Setup.
NOTE
:
ETH and ATM service connections cannot coexist. In Default Mode, up to
8 WAN connections can be configured; while VLAN Mux and MSC
Connection Modes support up to 8 WAN connections.
To
remove a connection, select its Remove
column
radio button and click
Remove.
Heading
Description
Interface
Name of the interface for WAN
Description
Name of the WAN connection
Type
Shows the connection type
Vlan8021p
VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
VlanMuxId
Shows 802.1Q VLAN ID
ConnId
Connection ID
IGMP
Shows Internet Group Management Protocol (IGMP) status
NAT
Shows Network Address Translation (NAT) status
Firewall
Shows the Security status
IPv6
Shows the WAN IPv6 address
MLD
Shows Multicast Listener Discovery (MLD) status
Remove
Select interfaces to remove
To
remove a connection, select its Remove
column
radio button and click
Remove.
To
Add
a new WAN connection, click the
Add
button and follow the instructions.
NOTE:
Up to 8 PVC profiles can be configured and saved in flash memory. Also,
ETH and PTM/ATM service connections cannot coexist.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
