11
Blink
DSL2 attempting sync:
l
Flashing at 2 Hz with a 50% duty cycle when
trying to detect carrier signal
l
Flashing at 4 Hz with a 50% duty cycle when
the carrier has been detected and the modem
is trying to train
On
The wireless module is ready.
Off
The wireless module is not installed.
Wireless
Green
Blink
Data transmitting or receiving over WLAN.
On
WPS enabled and PC connected to WLAN
Off
l
WPS disenabled when WPS configured
l
After clients connected to router about 5
minutes, LED is off
WPS
Green
Blink
The router is searching for WPS clients or WPS
un-configured.
On
Powered device connected to the associated port
Off
No activity, modem power off, no cable or no
powered device connected to the associated port
Yellow
(for
10/100)
Blink
Traffic is passing
On
Powered device connected to the associated port
Off
No activity, modem power off, no cable or no
powered device connected to the associated port
ETH 1
Green
(for
1000)
Blink
Traffic is passing
On
Powered device connected to the associated port
(includes devices with wake-on-LAN capability
where a slight voltage is supplied to an Ethernet
connection)
Off
No activity, modem power off, no cable or no
powered device connected to the associated port
ETH 2~4
Green
Blink
LAN activity present (traffic in either direction)
PDF created with pdfFactory Pro trial version
www.pdffactory.com
